Best Cedar Products – Our Top Picks – Page 4

Best Cedar Products – Our Top Picks

15 Jul 2024

Mark has been in the business for over 30 years and has seen a lot of Cedar products come and go. The products recommended here are based on his personal experience maintaining thousands of Cedar homes across the country.

These are the products we actively use today, or have used in the past, and all have been tried and tested across a range of locations and conditions.

If the product you are considering isn’t mentioned below, that doesn’t mean it’s unsuitable, only that we don’t have enough experience with the product to recommend it either way.

Always follow the manufacturers guidelines and choose the best Cedar product for your specific circumstances.

Lastly, if your Cedar has already been treated with a specific product and is still in good condition, it’s a good rule of thumb to use the same product for the best colour matching and application. If the product is starting to fail, look at the best solution for the timber regardless of what was used previously.

Best Cedar Cleaning Products

Preparing Cedar before applying an oil or stain is the key to achieving a smooth and consistent finish.

Over time, organic matter such as dust, moss and lichen will build up on the Cedar. As oils and stains are semi-transparent/translucent, any product or organic matter left on the surface will show up and look unsightly.

Which cleaning product you use depends on the current state of your Cedar.

Hit The Deck

Cedar that has no oil or stain on the surface will only require a gentle wash using an oxy cleaner or percarbonate solution to kill off any built-up organic matter. Hit The Deck by Wet & Forget works very well and doesn’t contain any bleaches or chlorine.

Dryden LiquidTimberClean

If your Cedar has been affected by the sun and started to age, you may need to brighten it back up. Dryden LiquidTimberClean is an oxalic acid-based cleaner that is effective at lightening stains and brightening timber. Be careful using this product around windows and joinery as it can tarnish the surface if not rinsed properly.

Resene Timber and Deck Wash

For general cleaning, Resene Timber and Deck Wash is very effective for cleaning hardwood and softwood timber surfaces. This wash only has a small amount of bleach and is effective at killing off anything organic. An excellent product, we use it all the time.

And avoid…

We do not recommend any products that contain a heavy solution of sodium hypochlorite, commonly known as bleach. This often comes with the benefits of “spray and walk away” or “done in 30 seconds”. It will certainly clean the Cedar and kill off anything that’s on the surface, but it can damage the cellular structure of the timber.

Quick Note About Stains

Stains are like white paint. You can buy white paint from 20 different paint manufacturers and each one will tell you why theirs is the best.

Which stain you use is much less important than when and where you use it.

Stains perform best out of the harsh UV, on areas sheltered by trees and other buildings, south-facing, or under soffits.

If used on areas exposed to the sun, they will eventually break down. If a stain cracks, water will get in behind and delaminate the stain, lifting it from the surface.

When stains fail, it takes a lot of work to make the stained surface look good, even more than with oil. Just remember, when choosing your coating, the sun will ALWAYS win. Make sure the stain is out of the sun, and you should be fine.

Best Cedar Stains

Resene Woodsman Waterborne Oil Stain

Resene Woodsman Waterborne Oil Stain is our stain of choice. This stain is a penetrating water-borne wood oil stain that is designed to erode, rather than form a film on the surface, which is what you want. As the stain is very thin, it gives a chance for the oil to get into the timber. This stain has been around for 15+ years and we have a lot of confidence in the product.

Cabbots stain

Cabbots stain, by Dulux, is another product we regularly use. Cabbots is an excellent stain, with the slight reservation that this is a film-forming product, and it can get brittle if over applied.

Coating Remover Sea to Sky by Resene

If you need to remove a previous stain before application, use a coating remover that uses organic or citrus based compounds. Avoid methylene chloride products, which are very aggressive.

Coating Remover Sea to Sky by Resene is an organic stripping compound that contains no harsh chemicals, and is very effective at removing paints, coatings and residues.

Be careful, it’s a messy job…

Mask or cover the areas adjacent to the areas you are working on and make sure you get all the product out of the timber. Use a water blaster at the correct pressure to remove any latent product sitting on the timber’s surface.

Quick Note About Oils

Unlike stains, not all oils are made equally. As oil is the base ingredient in these products, the quality of the oil can affect the speed of penetration and dry to touch time, and the final look and feel.

Choose an oil from a reputable manufacturer that has been formulated for the specific conditions in New Zealand.

Other factors to consider include the biocide package (to keep away nasties), available colour range and the degree of transparency. depending on how much you want the Cedar to come through.

All that said, it’s always better to apply oil to your Cedar than not. You are looking to protect the surface of the timber from the harsh sun, and anything is better than nothing.

Best Cedar Oils

There are 3 different products we can recommend. Before getting to our top pick, we need to cover a little history to better understand the evolution of Cedar oil products.

CD50

CD50 (now known as CUTEK Extreme CD50) is the original Cedar oil and has been around for 40 or 50 years. The product has since been bought by an Australian company and reformulated for the Australian market. We don’t use this product much as the alternatives listed below are better suited for New Zealand conditions. Regardless, this is a quality penetrating oil with a long and storied history.

Dryden WoodOil

Dryden WoodOil is owned by Dulux and specially designed for our conditions. 20 years ago, CD50 was sold off and the manufacturers reformulated Dryden WoodOil from the old CD50 chemical makeup. Dryden WoodOil is water-repellent, non-filming, and a true migrating oil that gets deep into the timber. We regularly use this product and can recommend it without hesitation.

Wood-X

Wood-X is our top pick and the oil we recommend for most of our customers. Wood-X is made by Resene and specifically formulated for New Zealand conditions. Wood-X is a non-film forming, viscous mineral oil that is designed to penetrate exterior hardwood timbers and improve dimensional stability.

Wood-X also has an excellent biocide package, high quality and proven tints (colour tones), and uses high grade oil content that speeds its penetration and ‘dry to touch’ time.

Full disclosure: TimberTech helped to develop Wood-X and Mark has a small shareholding in the business. We are proud of our association with Wood-X and wouldn’t recommend it if it wasn’t the absolute best product for our customers.

Need Help or Advice?

If you have any questions about the products we covered, please get in touch with our team. We are more than happy to give advice and point you in the right direction.

All Articles

14 Mar 2023

Should Cedar be left to Silver Naturally?

Many Cedar homeowners fall in love with the Scandinavian silvered look – minimalist, clean, with a silver sheen that accentuates the beauty of the timber and the natural surroundings.

But when it comes to achieving this look, there is a common misconception that all you need to do is leave the Cedar and silvering will happen naturally. Unfortunately, this is not true, at least in the New Zealand climate, and timber that is left to silver will eventually turn unsightly.

In this article we will cover what silvering is, how you can silver your Cedar safely while still protecting the timber, and some DIY tips for maintaining the silver look of your Cedar until you are ready to oil.

Is Silvering Bad for Cedar?

Without taking the location and climate into consideration, silvering itself is not bad for the timber. Silvering is caused by exposure to UV rays, which fray and loosen the top cells of the Cedar and cause the surface to become bleached.

In colder climates this isn’t a problem as the lower temperatures kill off the bacteria, retaining the beautiful, silvered look. But in a warm and wet climate such as ours, bacteria and mould will get caught in the roughened surface, and quickly turn the Cedar black.

Even if the mould and bacteria are removed, the natural silvering effect will often look patchy and uneven, detracting from the natural beauty of the timber.

Silvering Cedar the Right Way

So, is there any way to have the silver look you love, while still protecting your cladding? The answer is a resounding “Yes!”

Wood-X is a deep penetrating wood oil developed with Resene. It comes in a range of exciting colours – from rich reds and bush greens to a daring indigo blue – and a whole range of wood-protecting silvers. Applying a silver-tinted oil will protect your timber from the harsh UV rays, allow it to silver more quickly and give a more consistent silver look.

After applying the silver-tinted oil, you will need to follow a regular maintenance schedule to keep your Cedar looking its best. We recommend a soft wash every year, followed by recoating exposed areas every 2-3 summers.

DIY Silvering Maintenance

If you are not ready to oil your cladding quite just yet, a more affordable solution is to spray your house with a slow-acting mould and fungal killer such as Wet and Forget. This will remove the organic bacteria from the surface, but it will not replenish the natural oils of the Cedar or protect it against splitting and cupping in the future.

If you do not plan on oiling or staining your house, another option is to leave the silvering on as it provides natural protection to the layer below it. You can then use a slow-acting mould and fungal killer to keep it looking clean. The downside to this approach is that the timber will eventually look aged and tired.

Get Professional Advice You Can Trust

Ultimately, the best approach for protecting your cladding AND getting the silvered look is to oil your Cedar with a silver tinted oil. If you are unsure about the best approach and would like to talk with an expert, call us on 0800 298 298.

There is no obligation and our goal is always to look after the best interests of our customers over the lifecycle of their homes.

We love Cedar and are always happy to help!

15 Feb 2023

How Often Does Cedar Really Need to be Maintained?

The quick answer is: not as often as you might think. On a wall that is not in the intense sunshine, Cedar will practically last forever.

Apart from being stunning to look at, Cedar is extremely durable, a superior insulator and genius at taking up deep-penetrating oil. Cedar’s worst enemy is not rain, or wind, or city grime; it’s the harsh New Zealand sun. Left unprotected, UV rays will eventually dry out the timber, leading to fine cracks and roughening of the surface. This creates a toehold for mould, mildew and lichen to get established and make the timber look unsightly.

Regular oiling will prolong the beautiful look and weather resistance of your Cedar by penetrating deeply through the Cedar’s open cellular structure and replacing the natural oils lost over time.

Keep reading to learn how often you need to maintain your Cedar, what it might cost and the difference between maintaining new and older Cedar homes.

What Does Regular Maintenance Involve?

For most Cedar homes, regular maintenance will consist of a light rinse once per year at the end of winter, then a recoat of exposed areas every 2-3 summers.

Cladding only needs to be maintained on a face that is exposed to the UV rays. The remaining faces will also benefit from recoating, but this might only be 2 or 3 times over a 15-year period. The treatment that is required is very dependent on the level of UV exposure and other environmental factors.

Think of it like washing your car. If you don’t wash your car for 12 months, all the dust, debris and contaminants from the road will stick to the body. It’s the same for your house, but not as easy to spot as houses are usually flat colours compared to a shiny paint job.

How Much Will Regular Maintenance Cost?

It’s a misconception that owning a Cedar home means you will be burdened with expensive maintenance bills. Compared to houses that require regular painting, Cedar works out far more economical.

The cost will depend on the unique requirements of each house. The main factors will be the size of the house, how many stories it has and ease of access. A single-story bungalow with good access might cost $2-3k every 2-3 years. For a multi-level property with difficult access, you might be spending $8k on scaffolding before you even start looking at the timber.

Regardless of the cost, regularly maintaining your Cedar will always be cheaper over the long run than painting, or the worst-case scenario, having to reclad due to the timber cupping and splitting.

Having a regular maintenance plan can help to spread out the cost and give you peace of mind that your investment is protected – and will look beautiful for years to come.

New Builds vs Older Houses

Newly installed Cedar has a reservoir of natural oils and tannins, and it will take longer for the cellular structure to start to move. You may not have to do anything for 5 years, but eventually the Cedar will start to dry out and you will need to slow that process down with regular oiling.

New Cedar will most likely be pre-coated, or coated on-site before it gets installed. There will usually be a booklet that comes with the house telling you how the Cedar has been treated and what kind of maintenance it needs.

For a pre-existing Cedar home, the new homeowner will need to ask the previous owners what kind of maintenance plan they had in place, or what products they have used in the past. If the Cedar has been stained and the stain is in good condition, then it requires a light rinse every year and a recoat every 2-3 years, depending on the level of UV exposure.

If you are unsure about the status of your Cedar, one of our team can come around and advise you on what treatment it has received in the past, and what is required to maintain the Cedar over the lifetime of the house.

Make Your Cedar Look New Again

TimberTech are NZ’s #1 choice for Cedar protection, maintenance and restoration. Our unrivalled expertise and craftsmanship have been developed and proven over 20 years throughout New Zealand.

We will diagnose your Cedar and put together a 10-year maintenance plan, customised to your unique situation, with a maintenance schedule and a full breakdown of all the costs. There is no obligation and our goal is always to look after the best interests of our customers over the lifecycle of their homes.

To find out more, call us on 0800 298 298.

Showing 1 - 10 of 12

0800 298 298

0800 298 298

Best Cedar Products – Our Top Picks